Skip to main content

Weight Settings & Deviation

What is weight deviation?​

When Pickpad predicts an order's weight from the catalog, it also works out an acceptable range around that number. If the scale's actual reading falls outside that range, Pickpad can flag the order as potentially wrong.

The deviation is expressed as a percentage of the predicted weight, plus an optional absolute gram value.


Where deviation is configured​

You can set deviation at three levels, and they're applied in priority order (the most specific one wins):

LevelWhere to set itApplies to
DishCatalog → Dishes → edit a dish → Allowed Weight Deviation, (%)That specific dish only
CategoryCatalog → Categories → edit a category → Allowed Weight Deviation, (%)All dishes in that category that don't have their own override
StationOrder Accuracy → Weight delta percentEverything with no dish or category override, for orders at that station

If a dish has no deviation set, Pickpad checks its category next. If the category has none either, it falls back to the station's default.


Station-level defaults​

Each station's Order Accuracy block has two values that control its fallback:

SettingDefaultDescription
Weight delta percent5%The percentage tolerance applied to predicted weight
Weight delta absolute5 gA fixed gram tolerance added on top of the percentage tolerance. Station-only — there's no dish or category override for this one.

The percentage tolerance kicks in for any dish or modifier that doesn't have its own category or dish-level override; the absolute tolerance always comes from the station.